Reply With QuoteOuch.Glad your ok.l guess lucky it wasn't down the main straight.
Hey guys n gals,
I made a pretty basic error and missed a step in my usual changing wheels routine yesterday. Was on off rain at the track, the call was going from slicks to no slicks pretty regularly. I decided if I was going to get any track time in, I should probably just whack on my road wheels (Q3's on them). I had a few people jump in to help me change the wheels in the pits. It's a piece of piss to do and have done it many times before, but by myself...( just to be very clear here, I am in no way blaming anyone but myself for this) so front and rear were changed, tools getting passed around and unfortunately, not only did I not double check all bolts were tightened, I also missed putting lockwire back through caliper bolts. I am very thankful I didn't take anyone else out in the crash... Very silly of me.
So, 4? laps into the session, was having fun, thinking the Q3's aren't too bad, drops of rain on the visor etc, not pushing hard at all, round corporate hill, went to get on the anchors for old turn nine, lever straight to the bar, quickly grabbed again, once more, saw wall coming very quickly, not scrubbed off any speed, jumped on the rear brake, skids are cool, right? Then bam. The airfence has only been there for about a week! Only just caught the last metre or so thank god/allah/satan, pick your deity. Was kinda wedged in the airfence on my bike, turned ignition off, couldn't believe my arms were working, got off bike, couldn't believe my legs were working, had a look at the bike and realised I couldn't move it and walked away to wait for the inevitable ambulance ride. Walked away... Still can't quite believe I'm not broken! Bike is though, oh well...
Anyway, here is little clip of the crash!
https://youtu.be/D90w2_StXyk
TLDR; finger tight isn't enough on caliper bolts.
Ouch.Glad your ok.l guess lucky it wasn't down the main straight.
Ouch... glad they had them pillows up for you!
Hows the bike looking now after having a bit of pillow time .
Cbr 600rr 07 track
Those lovely pillows. Man they saved my hide.
Here's a pic of the front end Bob, it's not ideal. Hopefully motor is okay as I have another almost rolling chassis for it to go into. I just realised I forgot to release the straps holding the front end down last night, I hope I haven't damaged the fork seals!!!
Lucky you are ok!! That sounded like a hard hit
Fuck me!! You are a lucky boy. That was a solid hit.
I've had bits not done up when there have been multiple people helping with rushed wheel changes. It pays to take an extra minute and double-check everything yourself.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
That would not have been a nice feeling. Very rucky!
Fark man! Scary stuff...
Very glad you walked away ok tho
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
I have to say though, that was a freaking sweet slide up until, well... you know!
Not just lucky .. good aim ... you straightened it up after it looked like you were going left and the grass / tyres, you just got that air fence.
Wasn't a lot of time there to review many options, and the back brake washed a fair bit of speed off.
Mechanical failure is my worst fear as it's likely to cause you to come off at unusual places / angles.
Congrats and commiserations.
Thanks guys! I really think it was more good luck than good management. I never even thought of laying it down which a few people have said. I'd love to claim good control though!
It's a definite case of helping hands kind of hindering. Very simple job to change the wheels on your own bike, it's second nature and your mental checklist is checked off. One of those things though and I have certainly learned the hard way to not finish a job until I have finished a job if that makes sense?
Was a pretty sweet skid though, I do agree Mr. Ed!
Leanne asked me yesterday why I lockwired my calipers when I put the wets on, when I was only going to be changing them back that afternoon and this is why. I couldn't believe you were walking around showing us the footage on your phone after that impact! I'm sSo glad you came out of it unhurt, it could have been so much worse.
2011 ZX10R track/race bike
ZRX1200 road bike
Period 6 ZXR 750 race bike
P6 250 production RMX250 motard race bike
2015 YZ450F Dirt track/motard
TE511 trail bike/motard
Shiettt that was heavy! Glad you walked away ok dude!
Pronounced Kang-Ah not Kang-Gah
Hey Rob! Thanks mate, I am very surprised I was walking around too. Still in a state of disbelief to be honest... If nothing else, it's got a lot of people double checking stuff. It's pretty solid kick up my arse to make sure I do the same and do it properly. My everything is hurting today, but the alternatives could've been worse.
If you don't mind, could you ask if any of the recovery guys got a picture of the bike in the airfence? The ambo's said they were annoyed they didn't have their phones on them to take a pic. Massive thanks to Tim Sanford getting that put in, just wow, glad it was there.
Cheers,
Nath
Thanks Kanga, was an amazing feeling actually walking away from that!
I'll ask them tomorrow.Originally Posted by zoidberg
2011 ZX10R track/race bike
ZRX1200 road bike
Period 6 ZXR 750 race bike
P6 250 production RMX250 motard race bike
2015 YZ450F Dirt track/motard
TE511 trail bike/motard
Thankyou! If by any chance you read this today, if Tim Sanford is there tell him my mum reckons he is a saint.
Just got back for mount Gambier and this reminded me of a race there a couple of years ago when I single caliper bolt fell out (cos I didn't tighten it) I was a lot lucker just a scratch on wheel rim from caliper ... nearly shat myself when I saw after the end of the race .... glad your body is AOK .. and Tim is a Saint
WOW , i was waiting for the OOOOOOOHHHHHHHHH FFFFFFFFAAAAARRRRRRRRKKKKKKKKKKKKKKKKKKKKKKKKKKK . you did well to only do what you did , now dont dislocate your knee kickin yourself in the bum
I guess I'm pretty lucky the caliper didn't fall into the wheel elsewhere, many things could've made this worse, thank the gods it happened where it did actually!Just got back for mount Gambier and this reminded me of a race there a couple of years ago when I single caliper bolt fell out (cos I didn't tighten it) I was a lot lucker just a scratch on wheel rim from caliper ... nearly shat myself when I saw after the end of the race .... glad your body is AOK .. and Tim is a Saint
I'm copping a lot of flack from my mates about the girlie noises I made. I know I was winded, those noises were more of a pre emptive whimper as I tested my limbs. Should've made a more manly "take that fence!" call or something.WOW , i was waiting for the OOOOOOOHHHHHHHHH FFFFFFFFAAAAARRRRRRRRKKKKKKKKKKKKKKKKKKKKKKKKKKK . you did well to only do what you did , now dont dislocate your knee kickin yourself in the bum
And yep, I feel like a bit of an idiot... Both knee and arse are sore from me kicking myself, don't worry!
I didn't want to say anything, but since you brought it up.....
I would've just spliced in a bit of audio in post.... something like Arnie squatting 500kg. AAAAAAAARRRRRRRGGGGGGGHHHHHH!!!
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
I'd go with 'Aggressive Zombie'...
http://www.soundsnap.com/tags/grunting
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
That sounds like slow motion
Fuck me! Aimed well though mate. Glad all is well (relatively speaking).
Sent from my iPhone using Tapatalk
do a burnout
On a side note, glad they let cameras at ride days now. Should be some good videos coming out over the next few months!
Sent from my iPhone using Tapatalk
do a burnout
Good save! Glad you are ok!
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Bookmarks