Results 1 to 16 of 16

Thread: Zx10r Woolich Launch Control settings

  1. #1

    Zx10r Woolich Launch Control settings

    Hi guys.

    Just wondering if there is anyone out there that runs the Woolich racing software, and will be willing to share their setting.

    I have tried a few lower rpm launch settings with different ramp speeds, but not really had the chance nor location to test all day.

    This is my next map to test, thoughts?



    The log data software is great btw.



    Cheers

    Lee



    Sent from my iPhone using Tapatalk

  2. #2
    Rev the bike, slip the clutch and hope it's better than the guys around you. That's the science behind my starts


    Sent from my iPhone using Tapatalk

  3. #3
    Quote Originally Posted by johnnyb View Post
    Rev the bike, slip the clutch and hope it's better than the guys around you. That's the science behind my starts


    Sent from my iPhone using Tapatalk
    And it works well for you also Johnny 🏻


    Sent from my iPhone using Tapatalk

  4. #4
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Wow!! Looks impressive, Lee.
    What's the symptoms/negatives of launching at the moment?
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  5. #5
    Quote Originally Posted by johnnyb View Post
    Rev the bike, slip the clutch and hope it's better than the guys around you. That's the science behind my starts


    Sent from my iPhone using Tapatalk
    Mine is very similar to yours Johnny, except you have skipped a couple steps of mine; <close eyes, scream in terror> they fit between rev the bike and slip the clutch.

  6. #6
    Quote Originally Posted by Sicko View Post
    Wow!! Looks impressive, Lee.
    What's the symptoms/negatives of launching at the moment?
    I think its lack of practice and setup opportunity.

    The few I have tried started with massive wheelie (needed new undies) then went to extreme on the consecrative side, and could have jogged faster.

    So it getting the correct launch rpm, ramp time, etc.

    Thought that if anyone was using the software they could help out with a good setup.



    Sent from my iPhone using Tapatalk

  7. #7
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    So, the ramp doesn't start until 67Km/h then it does it for 1.75 seconds every shift?
    Would a slightly longer hold time not help with the wheelie? Then ramp up after that speed?
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  8. #8
    Quote Originally Posted by Sicko View Post
    So, the ramp doesn't start until 67Km/h then it does it for 1.75 seconds every shift?
    Would a slightly longer hold time not help with the wheelie? Then ramp up after that speed?
    Just first gear then goes back into silly mode lol
    But yes a longer hold would help, but as its "steady" increase to limit, the ramp time helps keep front end down plus wheelie control.
    I think you can see why I was looking for a map, or a good day of setup as there's loads of combinations, but I will work it out

  9. #9
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Yeah, totally. I think in the absence of a friendly map, trial and error is gonna have to be the way to go..
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  10. #10
    Quote Originally Posted by Sicko View Post
    Yeah, totally. I think in the absence of a friendly map, trial and error is gonna have to be the way to go..
    Time to find a setup location

  11. #11
    Quote Originally Posted by Leezx10r View Post
    Time to find a setup location
    ARDC private practice. You can practice starts all day if you want to.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  12. #12
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    7000 is good launch rpm. Why is your hold time 250? Ideally should be at 100. Are you slipping the clutch too much?

    You want to calculate how long it takes you to get to redline from when you release the clutch. That is how long you should set your ramp to.

    What is 1st gear speed based on your gearing at 7000? Ramp start speed should be just below that

  13. #13
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Should look like this


  14. #14
    Moderator Baddie's Avatar
    Join Date
    Feb 2013
    Location
    Glenmore Park
    Posts
    352
    Lee there a bloke on the zx10r.net site called ZX10RArcher always happy to help and theres a shitload of racers that well help as well..

    http://www.zx-10r.net/

  15. #15
    Quote Originally Posted by chubb View Post
    7000 is good launch rpm. Why is your hold time 250? Ideally should be at 100. Are you slipping the clutch too much?

    You want to calculate how long it takes you to get to redline from when you release the clutch. That is how long you should set your ramp to.

    What is 1st gear speed based on your gearing at 7000? Ramp start speed should be just below that
    Thanks mate, that's great just send you a pm 🏻


    Sent from my iPhone using Tapatalk

  16. #16
    Quote Originally Posted by Marshy View Post
    ARDC private practice. You can practice starts all day if you want to.
    Is that just leaving pit lane or can you "go round the back?" But am there on the 1st Nick

    Quote Originally Posted by Baddie View Post
    Lee there a bloke on the zx10r.net site called ZX10RArcher always happy to help and theres a shitload of racers that well help as well..

    http://www.zx-10r.net/
    I will join and have read, thanks mate will be a rocket when I get it dialled in


    Sent from my iPhone using Tapatalk

Thread Information

Users Browsing this Thread

There are currently 1 users browsing this thread. (0 members and 1 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •