Well the shoulder/wrist/thumb is well enough to work on bikes so it was time to start to resurrect the BMW after the crash.

First job was to see if it starts.

There was a complication because the cluster/dash was smashed and the BMW dash is coded to the ecu!!! Makes it hard/expensive to replace or use a replacement for testing.

Anyway, after checking the dash it appeared the circuit board wasn't too damaged so I temporarily "fixed" connectors, wiring, switches etc, plugged everything in, hot wired the ignition and she fired right up!

Now it's time to make her pretty again.



Sent from my iPhone using Tapatalk