Page 3 of 34 FirstFirst 123456713 ... LastLast
Results 101 to 150 of 1681

Thread: What I did today...

  1. #101
    Quote Originally Posted by DisPlaCeD View Post
    Had the Power Commander V & Auto Tune, front sprocket, BMC race air filter arrive... All fitted, except for the auto tune... because the Kawasaki does NOT run a M18x1.5 O2 sensor, you need to drill out and retap the existing hole, OR bung the existing and drill/tap a new one and use the adapter (fking kidding me!!) Anyway, will need new tyres as well to get it ready before Friday!!
    I had to do a similar thing with mine..... http://tarmactalk.com/forum/showthre...hlight=project
    I've had a bit of trouble sorting out the autotune to start making trim data through a switch, hopefully I'll know at the ARDC practice day
    2007 Yamaha FZ1 Championship winner (2012) (the tank)
    2007 Yamaha FZ1 Road bike
    2005 KTM 450 EXC (fun bike)
    2005 Yamaha R1 Class winner 2014

  2. #102
    Yesterday was a busy day.
    I fixed up my trailer with new wheel bearings and new LED lights that was needed. I also welded up the mud guard on that came off during the drive from PI.
    I also fitted new Driven chain and sprockets, and also mounted a bracket that I fabricated for my lap timer

    Here is the btacket



    I fitted some neoprean rubber to the back of it so it doesn't scratch my top triple and mounted it


    I'm also getting my tank and fairings painted, so I took off my stop grips and the tank covers I fabricated and gave them a sand and got them ready for primer, I've tested them out in a crash and they work a treat (also much cheaper). I cleaned the stompgrips and bought some adhesive so ill put them back on when the tank arrived.
    Here are the fibre glass covers I made.



  3. #103
    Nice work Mario, you still have access to a welder? I need to resurface my trailer, I'm turfing the van so the trailer is back in action

  4. #104
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    quick update...

    over to Nelso's today to fit them up... stem shaft pressed in, new bearings fitted, trees installed, forks mounted, including clip on spacers...



    One Happy Customer...



    Now for some polishing and reassembly
    Life's too Short- YOLO!

  5. #105
    That's awesome!! Nice photo Nelso!
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  6. #106
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    and they fit straight in Marshy
    Life's too Short- YOLO!

  7. #107
    That looks pretty good!! Also, Nelso has his own gym... not sure how that affects his proposal for heavier riders! hahaha

  8. #108
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Quote Originally Posted by Mr.Ed View Post
    That looks pretty good!! Also, Nelso has his own gym... not sure how that affects his proposal for heavier riders! hahaha
    obviously getting a lot of use....
    Life's too Short- YOLO!

  9. #109
    Moderator BoB's Avatar
    Join Date
    Feb 2013
    Location
    N.Beaches ,Sydney
    Posts
    397
    I have just worked it out why Nelso is so quick , the weight disadvantage is offset by the size of nelso's BIG balls in the 1st pic..
    Cbr 600rr 07 track

  10. #110
    Quote Originally Posted by BoB View Post
    I have just worked it out why Nelso is so quick , the weight disadvantage is offset by the size of nelso's BIG balls in the 1st pic..
    Multicoloured, too
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  11. #111
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    apparantly one is bigger than the other tho....
    Life's too Short- YOLO!

  12. #112
    Got a delivery last night






    I got a set of 30mm Cartridges with springs and a TTX 36 MKII, and they will be off to Zeno after the St George Round. A big thanks to Corey from Motomummy for looking after me

  13. #113
    Thems nice golden bits you have there...

  14. #114
    Very very nice

  15. #115
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Nice bouncy bits! Did you have to pay the gst and import tax?

  16. #116
    No i didn't. No invoice or price displayed on the packaging, something that was pre arrange that i always do with them

  17. #117
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Nice! Might have to start buying stuff from them as well!

  18. #118
    Installed belated birthday present
    -1 +1 also have a -2 front for wacky

  19. #119
    Also fitted some new tygon tubing the HRC line I bought was slightly bigger than 8mm and was sweating on the rear line
    While I was at it I replaced the front with 6mm tubing for the RCS

  20. #120
    Quote Originally Posted by senator8 View Post
    on it's way. Hopefully fix my start woes before St George

    Just for the record, this was pure awesomeness.
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  21. #121
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    starts sorted?
    Life's too Short- YOLO!

  22. #122
    Quote Originally Posted by Little Mick View Post
    starts sorted?
    So far, so good. We'll see on Saturday
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  23. #123
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Quote Originally Posted by senator8 View Post
    So far, so good. We'll see on Saturday
    Life's too Short- YOLO!

  24. #124
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    I did this a little while ago...thought I'd share...

    Sometimes its hard to get the part you need when you need it....


    What is it I refer to???

    Look in the middle of the pic below: Engine mount bush - part number 92154A



    One of these was a minimum of 5 weeks from OS from Kawasaki... and it wasnt feasible for a local wrecker to pull a bike apart to sort one out for the customer..

    so, decided the wait was hampering progress.... broke out some CrMo bar and made this.. (notice the original on the right with a bend in it)




    repaired as good as new and another happy brazillian Aussie
    Last edited by Little Mick; 27-10-2013 at 08:15 AM.
    Life's too Short- YOLO!

  25. #125
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Also had to do Seals on young blokes yz, so in addition to the seal driver above, I needed to sort out the tooling to get the damping assembly sorted..





    Needed a 49mm octagonal spanner for the outside and an adapter for the Comp valve....

    whacked this up for trialling..



    and this








    Used them yesterday.... worked a treat...

    Cheaper to buy the tools no doubt...but don't learn as much that way
    Life's too Short- YOLO!

  26. #126
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    one other tool I made up yesterday...not absolutely necessary, but nice to have and makes the job a little easier if you overfill with oil.. Some bikes also required the oil level filled to a certain distance from the top of the tube.. The Stainless Straw is set to the said setting then the excess is drawn back through the syringe





    Life's too Short- YOLO!

  27. #127
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    a couple of pics of the other tools in action...










    Life's too Short- YOLO!

  28. #128
    Weekend Warrior CBR42's Avatar
    Join Date
    Sep 2013
    Location
    Croydon
    Posts
    66

    Nice work Mick. Specially the triple clamps.

  29. #129
    Mick you are a genius, great work

  30. #130
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    thanks guys... gotta get a few more jobs out the way then onto the thumb brakes....
    Life's too Short- YOLO!

  31. #131
    Senior Member dan's Avatar
    Join Date
    Jun 2013
    Location
    Sydney
    Posts
    1,298
    You are a clever bastard! Very impressive.

  32. #132
    Quote Originally Posted by dan View Post
    You are a clever bastard! Very impressive.
    +1
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  33. #133
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Very very impressive work

  34. #134
    Senior Member Medic!'s Avatar
    Join Date
    Jul 2013
    Location
    bass hill
    Posts
    231
    Oh bloody hell that's it! I'm not posting anymore pics of my ummmmm lets call it handy work. Only so much gold paint and stickers can do and will never be anywhere near this. Nice job
    I'm going back into hiding
    No...I'm not loving that and I'm not loving that! But I'm loving this!

    http://www.break.com/video/ugc/oran-...il-2009-702765

    http://www.break.com/video/ugc/track...d-video-625380

  35. #135
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    need to pull my finger out and get the ZX6 back together...

    went to work on it today and found that the young bloke had the tools with him at the MX track...opted to do the ignition switch mod in the mean time.






    more pics here...

    http://s1173.photobucket.com/user/so...ition%20switch
    Life's too Short- YOLO!

  36. #136
    Don't think they'll let you launch missiles at your opponents mick!

  37. #137
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Quote Originally Posted by CLIFFY View Post
    Don't think they'll let you launch missiles at your opponents mick!
    The buggers are getting too fast to catch so missiles is a good option
    Last edited by Little Mick; 03-11-2013 at 07:22 PM.
    Life's too Short- YOLO!

  38. #138
    awesome. I need to figure out how to do this to the suzi now that I have a flashed ecu and no need for the immobilizer

  39. #139
    Quote Originally Posted by Little Mick View Post
    starts sorted?
    Yes!!!!
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  40. #140
    Senior Member dan's Avatar
    Join Date
    Jun 2013
    Location
    Sydney
    Posts
    1,298
    Quote Originally Posted by Negrogrande View Post
    awesome. I need to figure out how to do this to the suzi now that I have a flashed ecu and no need for the immobilizer
    Post up when you do!
    do a burnout

  41. #141
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Quote Originally Posted by senator8 View Post
    Yes!!!!
    BOOM!!! Show wetty how to do it
    Life's too Short- YOLO!

  42. #142
    Senior Member dan's Avatar
    Join Date
    Jun 2013
    Location
    Sydney
    Posts
    1,298
    Quote Originally Posted by Little Mick View Post
    need to pull my finger out and get the ZX6 back together...

    went to work on it today and found that the young bloke had the tools with him at the MX track...opted to do the ignition switch mod in the mean time.






    more pics here...

    http://s1173.photobucket.com/user/so...ition%20switch
    If that closes will it cut ignition?
    do a burnout

  43. #143
    Quote Originally Posted by dan View Post
    If that closes will it cut ignition?
    Interesting you ask that. Yes it does. I had the same switch on a car for nitrous. We had to remove the cover and just leave the toggle, as sometimes from vibration it would close.
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  44. #144
    Senior Member dan's Avatar
    Join Date
    Jun 2013
    Location
    Sydney
    Posts
    1,298
    Was thinking if you had a moment, maybe got off the seat, you might accidentally hit it closed which would make things interesting.

    Can you set it up so it's reversed - closed is on then flip it up to turn it off?
    do a burnout

  45. #145
    Mick, do you use CNC milling machines? I ask because i do a lot of 3D modelling for my work and am looking at getting some spare parts for my vortex rearsets made up.

  46. #146
    I ground down the actual toggle switch on my Blade, so that the switch stayed where it was put, even when the cover was closed.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  47. #147
    misguided youth Little Mick's Avatar
    Join Date
    Feb 2013
    Location
    in a house
    Posts
    1,007
    Quote Originally Posted by dan View Post
    If that closes will it cut ignition?
    Thats the Plan Dan

    Quote Originally Posted by senator8 View Post
    Interesting you ask that. Yes it does. I had the same switch on a car for nitrous. We had to remove the cover and just leave the toggle, as sometimes from vibration it would close.
    How much vibration Rick? the cover does sit up on its own but will keep an eye on it - thanks for the heads up.. it is easy enough to remove if need be - or do what marshy suggesterd

    Quote Originally Posted by dan View Post
    Was thinking if you had a moment, maybe got off the seat, you might accidentally hit it closed which would make things interesting.

    Can you set it up so it's reversed - closed is on then flip it up to turn it off?
    not with this switch dan as there is a keyway for the switch cover to lock into.. you could do it but the cover might vibrate arount the switch without the little tang.

    Quote Originally Posted by Mazabuzz View Post
    Mick, do you use CNC milling machines? I ask because i do a lot of 3D modelling for my work and am looking at getting some spare parts for my vortex rearsets made up.
    I'd love to use CNCs Mario - My machines are old school tho...Lathe is 60s vintage and miller is 70s at best..

    At some point I will get a CNC and do custom stuff but at the moment....its the way slower method.
    Life's too Short- YOLO!

  48. #148
    So what if i can produce production detail drawings, would that help?

  49. #149

    What I did today...

    Fixed the undersized fan wiring that caused the wire and fuse holder to get hot enough to melt and stop working at the St George meeting. Lucky no fire. Pics of what was used and what I replaced it with.

    Keyless ignition wired. (Thanks for the help Johnnyb) Just waiting for some Carbon fibre sheet to make up the switch mounts for the BMW and Suzuki.

    A pic of my throttle spring mod. The standard throttle is very heavy. Next up, is to make the throttle a bit quicker, and drop a couple of kilos off me and the bike


    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  50. #150
    Niice Rick!! Can you talk me through the throttle spring mod? I'd love to lighten mine a bit too - the yammie ones are too heavy also, particularly seeing as they aren't actually physically turning the butterflies!!
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


Thread Information

Users Browsing this Thread

There are currently 29 users browsing this thread. (0 members and 29 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •