What I did today...

[Marshy]

Maybe see if theres a gear position sensor on it that may need replacing or something???

I've had this problem on one of the Aprilias. On the RSV4, there's a sensor down near the gear linkage that feeds the gearbox rotational position to the ECU (thus engaged gear). Dunno what the 10R does, but it might be similar.

[Binksy]

Yea sounds pretty similar. I'll hopefully pull it off and give it all a bit of a clean and see if that does anything otherwise I suppose I'll be looking for a new one

[Marshy]

Checked a rim for straightness.... It looks fine, so back in the bike it goes



Sent from my iPhone using Tapatalk

[Turbo]

Checked a rim for straightness.... It looks fine, so back in the bike it goes




Sent from my iPhone using Tapatalk

Dem rotors tho...

[Marshy]

The rotors are perfect. Pity they don't fit the Ape.

[Mstevo]

had a play at expanding the dent out of the link pipe today with some left over liquid nitrogen (-200o)
the plan was to freeze water from either end towards the middle to where the dent is so it will expand, it's currently in the freezer getting harder, if that doesn't work I'll try compressed air and heating it.

You can also see just how good the case saver chain guard worked

PB200264.JPGPB210272.JPGPB210270.JPGPB210273.JPGPB210275.JPG

[Mstevo]

well that worked a treatPB210272.JPGPB210281.JPGPB210279.JPG

[Leezx10r]

That's a great result, and a fantastic idea

[Little Mick]

Love it Mark.

[Mr.Ed]

That is amazing!

[Marshy]

Wow. Just wow!

[Metal-Man]

Since friday lunch time ...

put new oil in the bike
fit new clip-ons
balanced rear tyre + assembled rear brake an fit
fit new rearsets I got from wetty last year as spares
exhaust is on
rad is on
got new Brembo RCS master cylinder Cannot fit as no forks yet)
fit new oil pump case cover + new crash protector
new oggy knobs (also spares from last year)
frame has been painted, from burn marks from frame straighteners
front calipers stripped and cleaned + assembled
fit new start switch (only temp for now, will fit fairing an see if it's in easy access)

still waiting on Fairing + forks

then bike is complete and ready for a shakedown ... yay
20151122_081311.jpg20151122_081328.jpg20151122_081340.jpg20151122_081419.jpg
20151122_081419.jpg20151122_083357.jpg20151122_083405.jpg20151122_083432.jpg

[Metal-Man]

will be unveiling the new look/colour scheme at next TD .. untill then ....keep guessing

[Turbo]

will be unveiling the new look/colour scheme at next TD .. untill then ....keep guessing

Looking good, Cam!! Can't wait to see the finished product!!

[Metal-Man]

Looking good, Cam!! Can't wait to see the finished product!!

thanks man, dun look much atm tho

[Metal-Man]

dun a lil more this arvo ...

tidied up the wiring

put some heat-shrink on the wiring, so it looks OEM, lol
also brought the Rizoma brake lever guard, cant fit it yet ...

20151122_161819.jpg20151122_161836.jpg20151122_161903.jpg

[Marshy]

Looks good, Cam. Your forks have progressed.... I think we might have a solution that will make you very happy, but I just need to check some more things first. All going well, next weekend they will be ready.

[windy]

Looking great Cam. Keen to see the end product.

[Leezx10r]

Part 1 of go fast bits fitted, ktech DDS cartridges

[Kimbo]

Leezx10r. Looks like somebody is working on your bike , instead of mine, ha,

[Turbo]

Part 1 of go fast bits fitted, ktech DDS cartridges

OMG, OMG!! Looking great mate. Can't wait to hear how you get on.

[chubb]

Ktech is good shit.

[RIPPERTON]

Who can straighten rims and how much usually ?

[Turbo]

Ktech is good shit.

All the cool kids have em....

[Marshy]

Who can straighten rims and how much usually ?

Dave (and Laurie) Alderton at Smithfield. Alderton Motorcycle Repairs (02) 9609 2889.

It's normally $100 per rim.

[Leezx10r]

Got the old rig back 🏻






Sent from my iPhone using Tapatalk

[Turbo]

Got the old rig back 

Yiewwww!! Very tidy looking, Lee!!
Can't wait to hear how they go. Gotta be worth a few seconds?!!

[chubb]

Interesting how they set it up to be so far through the triple clamps

[jaswib]

Paint done looks amazing from a couple of meters away up close its a bit iffy oh well thats what you get when you pay in beer the more they drink the worse the job gets lol.

Sent from my SM-G920I using Tapatalk

[Turbo]

Paint done looks amazing from a couple of meters away

That's all it needs, mate
Look tops!!

[zoidberg]

Paint done looks amazing from a couple of meters away up close its a bit iffy oh well thats what you get when you pay in beer the more they drink the worse the job gets lol.

Sent from my SM-G920I using Tapatalk

That's an awesome job for beer money! How much beer do they need and where are they???

[zoidberg]

Your bike looks unreal Lee! I don't mind the pile of tyres in the background either

[Leezx10r]

Paint done looks amazing from a couple of meters away up close its a bit iffy oh well thats what you get when you pay in beer the more they drink the worse the job gets lol.

Sent from my SM-G920I using Tapatalk

Looking great, real nice deep blue also mate


Sent from my iPhone using Tapatalk

[Leezx10r]

Your bike looks unreal Lee! I don't mind the pile of tyres in the background either

You can never have enough race rubber 🏻


Sent from my iPhone using Tapatalk

[jaswib]

Got the fairings installed and threw some stickers on there.
And installed a woodcraft key delete to free up some space up front.

Put it all back together and now the bikes running rough sounds like a air leak now to pull it back apart again. 😧

Sent from my SM-G920I using Tapatalk

[Marshy]

Bike looks great!! BTW, all the cool kids grind off the empty barrel bracket....

[Marshy]

Here ya go: http://tarmactalk.com/forum/showthre...ll=1#post19635

[jaswib]

Here ya go: http://tarmactalk.com/forum/showthre...ll=1#post19635

Definitely will do that Marshy unfortunately i ran short of time and enthusiasm. Im very happy in how your fairings turned out now just to get some of those Superbike Source stickers rumour has it they make you 5 sec a lap faster. 😉

Sent from my SM-G920I using Tapatalk

[Marshy]

rumour has it they make you 5 sec a lap faster.

6 seconds is the current figure, I believe

[Turbo]

Got the fairings installed and threw some stickers on there.
And installed a woodcraft key delete to free up some space up front.

Put it all back together and now the bikes running rough sounds like a air leak now to pull it back apart again.

Sent from my SM-G920I using Tapatalk

Top job, mate!!

Btw, what shift pattern do you use?

[danga]

Sent from my iPad using Tapatalk

[Metal-Man]

Looks good, Cam. Your forks have progressed.... I think we might have a solution that will make you very happy, but I just need to check some more things first. All going well, next weekend they will be ready.

great news Nick, thanks again for your efforts in finding a *solution* ... can't wait to get them back as well as the fairings ... prob best to pick them up at same time, aye!

[Metal-Man]

I've watched the "sportbiketrackgear" STG in Michigan USA video on the Woodcraft key switch eliminator, looks like it's worth every cent

[Kimbo]

fitting new fairings

[Phat3R]

Cam I ordered one for the R6 and GSXR last week ... they emailed back to check re the immobiliser ... told them it's been flashed out.

jaswib going to put some video up of starting bike?

Now got to get a keyless fuel cap for Yammy.

[jaswib]

Cam I ordered one for the R6 and GSXR last week ... they emailed back to check re the immobiliser ... told them it's been flashed out.

jaswib going to put some video up of starting bike?

Now got to get a keyless fuel cap for Yammy.

Will do tomorrow mate its pretty cool how it works. Funny one of the plugs didn't fit 2 pin as apposed to 1 pin but the bike works so not to sure what it does.

Sent from my SM-G920I using Tapatalk

[Leezx10r]

Just having a play in the shed, setting up the launch control ��

[Marshy]

<drool>

Sooooooo cool!!!! Sounds awesome mate

[jaswib]

Came upon a problem when installing the woodcraft key eliminator one of the plugs would not fit (single pin on the bike and 2 pin on the woodcraft piece) not sure what it does the bike does start its running rough tho sounds as if its sucking air.
20151129_114333.jpg20151129_114337.jpg20151129_114346.jpg20151129_114348.jpg
and here the finished product of said key eliminator

[Marshy]

Niiiiiice!!