I <3 the mailman

[Negrogrande]

he delivers goodies
544544_10151632619570671_632715132_n.jpg

[senator8]

Nice
Always exciting to get goodies. I haven't had any for a while :(

[Negrogrande]

Nice
Always exciting to get goodies. I haven't had any for a while :(

You have the nicest trackbike that I have ever seen in person, no need for a :(

[chubb]

I got new goodies today too!

excited!

[Negrogrande]

I got new goodies today too!

excited!

Hooray!

[chubb]

you got valves for the rear shock too Negrogrande?

[Negrogrande]

no not yet, upgrading as the budget allows

but I did get compression & rebound valves for the forks

[Marshy]

Love new goodies!!

[Baddie]

Good luck with that brembo bastard...I'm pulling the whole front braking system and bench testing the mother.
There is no way there's any air in the bastard but I've spent the last two days at the creek comparing lever travel and I'm not happy.

Specially the 11th being Honda Day.

[Saturnalian]

Good luck with that brembo bastard...I'm pulling the whole front braking system and bench testing the mother.
There is no way there's any air in the bastard but I've spent the last two days at the creek comparing lever travel and I'm not happy.

Specially the 11th being Honda Day.

Mines rock solid. Maybe you should try riding the bike with the thing first and then see how you go.
It really is difficult to get a sense of performance from your Moto GP lab.....

[Marshy]

+2
Riding it will pump any air pockets out

[Negrogrande]

Good luck with that brembo bastard...I'm pulling the whole front braking system and bench testing the mother.
There is no way there's any air in the bastard but I've spent the last two days at the creek comparing lever travel and I'm not happy.

Specially the 11th being Honda Day.

must be a curse on them, when I was removing the old banjo bolt to install new copper washers
this happened
brake banjo.jpg jo.jpg


not sure if it is possible to replace the banjo or it is a complete new line, have contacted galfer and they are advising whether it is a new line/banjo and whether it is covered under warranty

[Marshy]

Far out!! That's not good - I'd be surprised if they didn't warranty that.

[Negrogrande]

I also discovered that whoever tightened my axle was half gorilla, it is on SO tight. never leaving the bike for a wheel change again, will take wheels in I think

[Marshy]

I also discovered that whoever tightened my axle was half gorilla, it is on SO tight. never leaving the bike for a wheel change again, will take wheels in I think

Rattle gun - most likely put on with one, so you need one to get it off!!

[Negrogrande]

Rattle gun - most likely put on with one, so you need one to get it off!!

S.H.I.T. might have to go shopping for one on the weekend

[Negrogrande]

half the job is done now

borrowed a mates rattle gun and the nut came off instantly


only took 10 mins to get the forks out once I got the axle nut off

[Marshy]

Rattle guns rock! My favourite tool.

Oh, and I heart the postman today too:

[chubb]

Oooh shiny y pipes

[Negrogrande]

love shiny bits

[dan]

I got some things coming - can't wait!