St George round 5 & 6 Eastern creek 2/3 November

[Medic!]

Let's do a wife swap. Mine causes me so much stress I'm about 15kg under weight. Might have to get the leathers taken in a few inches if I lose anymore.

[Marshy]

Let's do a wife swap. Mine causes me so much stress I'm about 15kg under weight. Might have to get the leathers taken in a few inches if I lose anymore.

Hmmm, swings and roundabouts there, I guess. Maybe I'm so fat because the wife looks after me so well. Yeah, that's my excuse and I'm sticking to it!!

[chubb]

Nothing like cupcakes for dessert!

[Stu23]

can we not talk about weight !

[Mr.Ed]

can we not talk about weight !

What's the latest on that front Stu? Should I start having tarts delivered to your door yet?? I need you to carry at least a 15Kg ballast, mate... and that's if I lose a few more kgs! hahahha

[chubb]

I think modified motors in club racing should be banned!

[senator8]

I think modified motors in club racing should be banned!

Why? There's already classes for that. One being called production racing

Hmmm, swings and roundabouts there, I guess. Maybe I'm so fat because the wife looks after me so well. Yeah, that's my excuse and I'm sticking to it!!

Umm yep. I'm happy with mine. Keep asking though Medic. You might get a taker

can we not talk about weight !

Agreed

hahaha I'm afraid I'll have to side with Chubb... I've been thinking about the Ninja300 Cup and to be competitive on that I'd need to drop at least another 5Kg (currently 70Kg) and pray for some new found talent!!!

Or we can do both:

Rider under 90Kgs - ballast to make up for it

Non stock engine - add 20kgs

Ed, if you're 70kgs what are you on about? If I was you I'd lay low about the weight. There are plenty of us with 20+ kgs on you

[Phat3R]

Question re tip over sensors ... for racing do you disable them or you would prefer it cuts out?

[Mr.Ed]

Ed, if you're 70kgs what are you on about? If I was you I'd lay low about the weight. There are plenty of us with 20+ kgs on you

Never ridden the bike in this new 'class' so I'm not too sure if I'd have any advantages! Last time I raced I was 85kgs...

[Phat3R]

Never ridden the bike in this new 'class' so I'm not too sure if I'd have any advantages! Last time I raced I was 85kgs...

So what's 10kg worth around the Gardner Circuit on a 300 twin?

The Ninga300 cup could be sponsored by Lite & Easy or Jenny Craig ....

[Mr.Ed]

So what's 10kg worth around the Gardner Circuit on a 300 twin?

The Ninga300 cup could be sponsored by Lite & Easy or Jenny Craig ....

Not sure... but if on F1 the current issue is drivers having to lose weight 'cause 5Kg more equals something like 0.2sec/lap, I'm guessing on an even lighter and extremely underpowered vehicle (35hp?) it should prob be a lot more.

[Stu23]

I think anyone under 90kgs should carry ballast to make it up on their back !!

[Marshy]

I think anyone under 90kgs should carry ballast to make it up on their back !!

+1 billion!!

[Nelso]

I think anyone under 90kgs should carry ballast to make it up on their back !!

I've told you before it needs to be anyone under 120kg. All you light weight 90kg riders need to stop your whinging about weight disadvantages.

[Phat3R]

I've told you before it needs to be anyone under 120kg. All you light weight 90kg riders need to stop your whinging about weight disadvantages.

Can't they just make the bike / rider combo the same weight for everyone in the class? Still slight advantage for the lighter riders if the ballast is situated under the current C of G.

[Little Mick]

Can't they just make the bike / rider combo the same weight for everyone in the class? Still slight advantage for the lighter riders if the ballast is situated under the current C of G.

No!

[Mr.Ed]

No!

[Mr.Ed]

hahaha I'm afraid I'll have to side with Chubb... I've been thinking about the Ninja300 Cup and to be competitive on that I'd need to drop at least another 5Kg (currently 70Kg) and pray for some new found talent!!!

Or we can do both:

Rider under 90Kgs - ballast to make up for it

Non stock engine - add 20kgs

[Phat3R]

hahaha I'm afraid I'll have to side with Chubb... I've been thinking about the Ninja300 Cup and to be competitive on that I'd need to drop at least another 5Kg (currently 70Kg) and pray for some new found talent!!!

Or we can do both:

Rider under 90Kgs - ballast to make up for it

Non stock engine - add 20kgs

Or could just have a TT fatties sub class - with a box of cup cakes for the winner?

I'm pretty keen on one of these little beasties too.

[Stu23]

[chubb]

Over 70kgs racing club class

[senator8]

Over 70kgs racing club class

That's PCRA

Or could just have a TT fatties sub class - with a box of cup cakes for the winner?

I'm pretty keen on one of these little beasties too.

Pcra would never spend that much on trophies

[Marshy]

Pcra would never spend that much on trophies

[Marshy]

Definitely leave them connected. Mucho damage can result from not having one.

Back in the olden days, before tip-over switches, we used to race with lanyards on (like on a tinny with an outboard, on a stretchy cable), so that if you parted company with the bike it killed the ignition.

Like this:

[Phat3R]

Definitely leave them connected. Mucho damage can result from not having one.

Back in the olden days, before tip-over switches, we used to race with lanyards on (like on a tinny with an outboard, on a stretchy cable), so that if you parted company with the bike it killed the ignition.

Like this:

Thx Marshy ... I've still got to sort out my side stand kill switch for St George ... if I keep the side stand for TD's I was thinking that I should also keep the kill switch too so I don't go out with the thing down / partially up.

Seems like you can just remove the switch at the plug and put another plug in with a shorting wire to stop the cut out. Like this: http://www.boostbysmith.com/eliminators.html. May make the most sense ... but where to go for these Suzuki electrical connectors ... dealer I guess ... or buy a switch from wreckers and just use the plug? Wonder which will be cheaper?

[Negrogrande]

Thx Marshy ... I've still got to sort out my side stand kill switch for St George ... if I keep the side stand for TD's I was thinking that I should also keep the kill switch too so I don't go out with the thing down / partially up.

Seems like you can just remove the switch at the plug and put another plug in with a shorting wire to stop the cut out. Like this: http://www.boostbysmith.com/eliminators.html. May make the most sense ... but where to go for these Suzuki electrical connectors ... dealer I guess ... or buy a switch from wreckers and just use the plug? Wonder which will be cheaper?

I might have a spare I bought it from this guy on eBay http://stores.ebay.com.au/smartmoto

I will check my toolbox

[dan]

Thx Marshy ... I've still got to sort out my side stand kill switch for St George ... if I keep the side stand for TD's I was thinking that I should also keep the kill switch too so I don't go out with the thing down / partially up.

Seems like you can just remove the switch at the plug and put another plug in with a shorting wire to stop the cut out. Like this: http://www.boostbysmith.com/eliminators.html. May make the most sense ... but where to go for these Suzuki electrical connectors ... dealer I guess ... or buy a switch from wreckers and just use the plug? Wonder which will be cheaper?

Come on, live a little haha

Lose the kill switch and install a clutch bypass so you can start it without pulling the clutch AND in gear. Heaps real!

[Marshy]

Come on, live a little haha

Lose the kill switch and install a clutch bypass so you can start it without pulling the clutch AND in gear. Heaps real!

I did both to my gixxers. Never looked back! Besides, you've only gotta ride down pit lane with the sidestand still down once - with the entire 180 riders at a track day screaming and pointing at you - before intense embarrassment cures you of your forgetfulness. Trust me, I know

[dan]

I did both to my gixxers. Never looked back! Besides, you've only gotta ride down pit lane with the sidestand still down once - with the entire 180 riders at a track day screaming and pointing at you - before intense embarrassment cures you of your forgetfulness. Trust me, I know

Getting pointed at by White Group. How emasculating haha

[Phat3R]

Definitely leave them connected. Mucho damage can result from not having one.

Back in the olden days, before tip-over switches, we used to race with lanyards on (like on a tinny with an outboard, on a stretchy cable), so that if you parted company with the bike it killed the ignition.

Like this:

Why Kev using one of dem at FX?

https://www.facebook.com/photo.php?f...type=1&theater

[chubb]

I didnt think you could race with a side stand?

Or cant I understand engrish

[Phat3R]

I didnt think you could race with a side stand?

Or cant I understand engrish

Correct, it's currently an on again off again sort of thing! :-)

Race = No side stand
Track Day = side stand

[Marshy]

Or cant I understand engrish

It's you, chubb

I had a look in the shed, and I've got a sidestand for gixxer, but not the wire (and thus the plug). I've also checked the partial wiring loom left over from the gixxer (and the two complete yamaha ones) and I still don't have a spare plug, sorry. You could wire a switch into the bike side of the cutout plug, to close the circuit when you remove the sidestand for racing....

Oh, I've also just found a K&N filter for a K8 gixxer 600/750 in excellent condition (I just serviced it with cleaner and new oil). $40 if anyone wants it.

[Phat3R]

You could wire a switch into the bike side of the cutout plug, to close the circuit when you remove the sidestand for racing....

Hey switch isn't a bad idea ... JayCar have some marine grade SPST I was eying off for your fan mod when I move to H2O for the radiator ... might get two of them and do some soldering this weekend.

[Negrogrande]

Oh, I've also just found a K&N filter for a K8 gixxer 600/750 in excellent condition (I just serviced it with cleaner and new oil). $40 if anyone wants it.

me

[Marshy]

me

Done. Are you able to make it tomorrow??

[Negrogrande]

Done. Are you able to make it tomorrow??

Can't make it tomorrow, after negotiating the day off I've been stung by a bee on my hand and now have bratwurst for fingers, can swing by yours on Monday though

[Mr.Ed]

Where are all the engineers when we need them!?

[Marshy]

[Little Mick]

what are we engimaneering????

I have a plan....design for light weight ballast

[Mr.Ed]

what are we engimaneering????

I have a plan....design for light weight ballast

As long as it's low volume I'll back it up!

[Little Mick]

will be based on water, then have a hydrogen separator incorporated that will split the molecules, forming gases and making them lightweight. have them converted back to liquid for end of race testing...

[Marshy]

will be based on water, then have a hydrogen separator incorporated that will split the molecules, forming gases and making them lightweight. have them converted back to liquid for end of race testing...

Ooh, a fuel cell!! Mmmm, I'm thinking very KERS-ish, delivering an extra 80hp??

[Little Mick]

Ooh, a fuel cell!! Mmmm, I'm thinking very KERS-ish, delivering an extra 80hp??

hehe ... maybe an extra "cooling Fan" that forces extra air into air intakes at high pressure to "keep it all cool"

no one will notice...
p1020760w.jpg

[dan]

I may not be in the 90kg+ club but my mental and mechanical disadvantages are enough trouble as it is!

[Marshy]

mechanical disadvantages

Yup, you ride a Suzuki. That's a massive disadvantage right there.

<runs for cover>

[chubb]

Yup, you ride a Suzuki. That's a massive disadvantage right there.

&lt;runs for cover&gt;

Hahaha!!

No need to run for cover, those zook riders will convert when they ride another bike.. like those green or blue blooded ones

[dan]

Yup, you ride a Suzuki. That's a massive disadvantage right there.

<runs for cover>

This guy.

I have no complaints about the old girl at this stage. She is very big though...

[Marshy]

Love it!!

[Marshy]

Does anyone want the sidestand?? $30. (they are like $110 from Metros).