Heat shield

[Marty]

I'm after some stick on heat shield to put in my fairing where my new exhaust almost sits on the fairing and on the undertail. I've tried supershit and repco and not surprisingly I just get a bunch of blank stares.

I'm in Sydney. Anyone recommend a brand or supplier or want to sell me some lengths they got lying around?

Cheers
Marty

[dan]

I got some from AutoOne in Newtown. I'm sure you'll find it on ebay though and not have to deal with useless staff.

[Marty]

I got some from AutoOne in Newtown. I'm sure you'll find it on ebay though and not have to deal with useless staff.

Thanks Dan, I'm just a bit worried about shipping times at this time of year, I'm trying to find something for next weekend. I'll have a look for a local autoOne

[Baddie]

The best shit since slice bread..

http://www.thermalvelocity.com.au/pr...T_ID=&P_ID=412

[Little Mick]

I got some 2 Inch wide tape from AutoBarn.. wasnt cheap-- $60-70 per roll

[Negrogrande]

I've got some spare you can have

[Marty]

I've got some spare you can have

Damn, I just ordered some of the stuff baddie posted! Why why why

Thanks heaps for the offer Andrew. This place claims to be in Sydney so hopefully it only takes a few days to arrive.

[Marty]

Woohoo great shipping from thermal velocity, it arrived today. Going to install tonight! Just in time for my dyno tomorrow

[CLIFFY]

MCAS stock it

[Mazabuzz]

MCAS stock it

If MCAS stocks only one type then it's shit stuff. I bought some for my new belly plan and it only lasted one outing not before it burnt off.

[KANGA]

Yeah I need some for my belly pan as well, I'm in Annandale so might head over to the autoone Dan suggested. How much did it set you back Dan?

[Mr.Ed]

Are you sure you need it? I run an aftermarket full exhaust and had the OEM before and never had any issues... and that's despite the thing touching the belly pan 24/7. It just never gets hot enough to burn it I think.

[senator8]

Depends on the tune Ed. Leaner-hotter. I have to use it on both of mine.

[dan]

Yeah I need some for my belly pan as well, I'm in Annandale so might head over to the autoone Dan suggested. How much did it set you back Dan?

Was about $50. It is about 50mm wide and in a 30' length I think. Not cheap but I was desperate.

I'm in Annandale too!

[KANGA]

Are you sure you need it? I run an aftermarket full exhaust and had the OEM before and never had any issues... and that's despite the thing touching the belly pan 24/7. It just never gets hot enough to burn it I think.

The first day of running it smoked up a bit, admittedly I didn't notice it on the second day so maybe it just burned off a bit of something0 and is fine now.

Was about $50. It is about 50mm wide and in a 30' length I think. Not cheap but I was desperate.

I'm in Annandale too!

Oh no way! This was parked on my street a few weeks ago, yours??

[Mr.Ed]

Depends on the tune Ed. Leaner-hotter. I have to use it on both of mine.

Mine was 'self tuned' to 13.2 AFR for most of the map (12.8 from 11K+), not the leanest but not the richest either I reckon

[Marty]

Are you sure you need it? I run an aftermarket full exhaust and had the OEM before and never had any issues... and that's despite the thing touching the belly pan 24/7. It just never gets hot enough to burn it I think.

Yeh it sits a lot closer to the fairings now, I ran it with the fairings on for a few mins and bits started to catch fire.


Sent from my iPad using Tapatalk HD

[Mr.Ed]

Then I think it's safe to assume you need the heat shield

[dan]

Oh no way! This was parked on my street a few weeks ago, yours??

Yep, that's my baby. Poor thing.

[Marty]

Yep, that's my baby. Poor thing.

Oh no what's it doing on the road? You got nowhere to store it?

[dan]

Oh no what's it doing on the road? You got nowhere to store it?

Was chilling there for a couple of days while I was in hospital then was back in the workshop on the bench.

[KANGA]

Yep, that's my baby. Poor thing.

Ha! how about that, like 100m from my place. Will have to grab a beer some time

[dan]

You're on Nelson St? I'm just on Albion. When am I going to see you doing happy laps on the race bike?

[KANGA]

You're on Nelson St? I'm just on Albion. When am I going to see you doing happy laps on the race bike?

yep yep! few hundred up from the Albion/nelson st intersection. I'm out again 21st & 22nd in yellow group.

[dan]

I meant happy laps around the block!

I'll probably pop out on the 22nd to drink some beers and talk shit and claim I'd be doing 1.40s if it wasn't for my busted ankle.

[Marty]

I meant happy laps around the block!

I'll probably pop out on the 22nd to drink some beers and talk shit and claim I'd be doing 1.40s if it wasn't for my busted ankle.

I'll be there on the 22nd if all goes to plan. Getting the bike dyno'd this sat.

[KANGA]

I cut a 2 minute to supabarn and back, 3 if I stop at the bottle'o :P

[KANGA]

If anyone's interested I ended up taking a risk with this, cheap enough and didn't notice the regular fiberglass burning smell on Saturday
http://www.ebay.com.au/itm/Car-Turbo...item2583d6b3a0