Quick question:
Which brake pads do you guys recommend between, brembo rc & ferodo cp1 pads?
No road, 100% track for a zx10r.
Cheers
Lee
Sent from my iPhone using Tapatalk
Quick question:
Which brake pads do you guys recommend between, brembo rc & ferodo cp1 pads?
No road, 100% track for a zx10r.
Cheers
Lee
Sent from my iPhone using Tapatalk
Vesrah SJRL XX They're not the cheapest but good Lord they're good! But tbh, the stockies from Kawa are not bad either... just that the Vesrah is in a league of its own IMHO. I tried the ferodo before, ok-ish I'd say. Hated the EBCs and for some reason they only lasted me 7 days but lots of ppl love them. Never tried the Brembos.
Thanks mate, heard good things about the vesrah SJRL will have a read up on them cheers lee
+1 for Vesrah, they're like a baseball bat through the spokes!
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
$165us + $30us shipping $195us, sound about right?
Sent from my iPhone using Tapatalk
Kurveygirl used to be the cheapest then sportbriantrackgear started carrying them as well
http://stores.sportbiketrackgear.com...0%3ABrake+Pads
shipping should be abt the same if memory serves me right
bout right, ZX-6 ones cost around 97 bucks per caliper iirc
Pronounced Kang-Ah not Kang-Gah
Never tried the vesrah. On my next to get list.
I'm using the ferodo ones and a lot better initial bite then the stock r6 ones.
Get the Vesrah. Don't waste time with anything else. Make sure they are the SRJLs, not the cheaper RJLs.
That price sounds a tiny bit cheap. KurveyGirl is normally cheapest for Vesrah. Check it out.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Yep that's who I found to be the cheapest after having a quick look on the web
These the right once Marshy http://stores.sportbiketrackgear.com...l.bok?no=30041 ?
thanks again everyone for your help, will place a order for a set
was it you out there in the 1000cc today?
They are the shinizzle!!! Wait until you try them!
Oh, be sure to take your discs off and sand them back with 180 grit. Get all the old pad material off. And don't worry about bedding the new pads in; they don't need any. They stop at virtually 100% from the first brake application.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
That's a guaranteed no regrets purchase!
You have them now, but for what it's worth... I use the Brembo carbon ceramic pads... They are monumental! And just when you think you can't go any later, try and oh, you SO can!! Very happy, even with the $$$$$$$ price tag. Worth it! Just remember, for all new pads, to rough up your discs first, helps bedding in.
Isle of Man TT Apprentice.
Racing... it's life. Everything else is just waiting.
2008 Suzuki GSXR1000 Race bike -SOLD
2010 Kawasaki ZX6R Race bike (my chariot for the IOMTT)
Yep that was the other pad I was going to get, mate I track with just got them for his rsv4f so we thought trying different parts on each bike for comparison
Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Just making sure you're paying attention....
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
I use Brembo Z04 in my RSV4, fantastic pads , though they wear out quick ,
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
There are currently 1 users browsing this thread. (0 members and 1 guests)
Bookmarks