St George November

[senator8]

B

I read somewhere that they were meant to have 118HP standard, so it would be a bit low if that is the case. It would be nice to have 10 or 15 more, at least I would be able to keep with the 600s at least. It seemed over geared for EC, which meant I had to drop a gear out of 2 and 6 that I should have been able to carry and it was very sluggish up the hill after 5 and from 1 to 2, even in 5th gear. I think it's got 15:45 on it now, which I thought would be ok, but it just doesn't have the power to drive that gearing. Are you still running the standard carbs? I thought you would have flat slides on yours for some reason. I take it the race kit isn't just a Factory Pro kit; do you remember where you got it from?

Yeah, sounds a bit under. I've found with stock engine that 15/44 is about the max gearing for optimum pick up between gears and anything taller drops it too much on the changes. Mine is the factory pro Ti kit. I sent my carbs to U.S for refurb and supply fit kit. Worked out cheaper than just kit fitment cost I could find here locally. Then the locals also wanted dyno tuning time etc etc. The carbs as returned to me, have run perfect from get go and check on the dyno confirmed it was spot on. Let me know if you want the contact details.