Page 1 of 4 1234 LastLast
Results 1 to 50 of 180

Thread: Chubb's new steed

  1. #1
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032

    Chubb's new steed

    Bringing home the beast today






  2. #2
    Moderator Baddie's Avatar
    Join Date
    Feb 2013
    Location
    Glenmore Park
    Posts
    352
    You are going to love it....

  3. #3
    Quote Originally Posted by Baddie View Post
    You are going to love looking at it sitting in the garage as much as I did mine....
    When's the maiden voyage Rancell?
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  4. #4
    Come to EC on the 3rd

  5. #5
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Yieeewww!! Looks great mate.
    Can't wait to hear how you get along with it.
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  6. #6
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by senator8 View Post
    When's the maiden voyage Rancell?
    SMP on the 4th

  7. #7
    WOOOOOOOHOOOOOOOO!!!! Nice, mate!
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  8. #8
    Congrats!

    You keeping the color or going 'creative'?

  9. #9
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    how good are profibre fairings?? There is a new set with the bike.. The other two are cheap nasty abs chinese ones. Gonna piss them off and maybe use the other one for trackdays..

    Then there's all the road fairings which I'm going to sell too..

  10. #10
    Well done mate , early Christmas

  11. #11
    Very nice Chubb. Rolling on the ktech also


    Sent from my iPhone using Tapatalk

  12. #12
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    I hear the Ktec suspension are good

  13. #13
    Quote Originally Posted by chubb View Post
    how good are profibre fairings??

    .
    when/if you smash em up ask Boris to slip em back in the mould and fix em 4u

  14. #14
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Who is Boris?

  15. #15
    Quote Originally Posted by chubb View Post
    Who is Boris?
    Owner of pro fibre

  16. #16
    Quote Originally Posted by WETTY View Post
    Owner of pro fibre
    From Slovakia or Slovenia or Stolichnaya or some such.
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  17. #17
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Need some local lads

  18. #18
    Quote Originally Posted by Marshy View Post
    From Slovakia or Slovenia or Stolichnaya or some such.
    the middle one

  19. #19
    So is Akrapovic, no?

  20. #20
    Quote Originally Posted by Mr.Ed View Post
    So is Akrapovic, no?
    slovakia arent they ? just round the corner . pop in and say hi

  21. #21
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Just got to get some bits and bobs sorted over the next few weeks.

    Clip ons, some brake protectors in case someone merges right, get a proper exhaust hanger. Maybe some different brake and clutch levers.
    Will strip it tonight.

    anyone know anything about flashing the ECU? Looking at the Woolich stuff but some people reckon Tuneboy is the way to go. (Gonna keep this one to superbike rules)

  22. #22
    Maybe ride it 1st and see if you need anymore
    Mine scared me at the 100m
    Woolich is good
    Get a decent pipe and spring it to suit your skinny arse

  23. #23
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by WETTY View Post
    Maybe ride it 1st and see if you need anymore
    Mine scared me at the 100m
    Woolich is good
    Get a decent pipe and spring it to suit your skinny arse
    Yeh the pipe on it is shit..(hotbodies crap) gonna ask the boss about the Arrow ones.

    Ktech already set up to my jockey frame.. even got 3 different springs front and rear in case Santa feeds me too much over Christmas

  24. #24
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by chubb View Post
    I hear the Ktec suspension are good
    +1million!!
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  25. #25
    Senior Member Nelso's Avatar
    Join Date
    Mar 2013
    Location
    Wollongong
    Posts
    391
    Quote Originally Posted by chubb View Post
    I hear the Ktec suspension are good
    It's what lots of quick guys have been running, so it can't be too bad. Leanne had a go on one set up with Ktec suspension a couple of weeks ago and said it was perfect. Now, she wants (says she NEEDS) to get one! She has already sold both of her 125s and has the ZX6 up for sale, so it won't be too long before she gets hers too.
    2011 ZX10R track/race bike
    ZRX1200 road bike
    Period 6 ZXR 750 race bike
    P6 250 production RMX250 motard race bike
    2015 YZ450F Dirt track/motard
    TE511 trail bike/motard

  26. #26
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by Nelso View Post
    It's what lots of quick guys have been running, so it can't be too bad. Leanne had a go on one set up with Ktec suspension a couple of weeks ago and said it was perfect. Now, she wants (says she NEEDS) to get one! She has already sold both of her 125s and has the ZX6 up for sale, so it won't be too long before she gets hers too.
    need is the right word here..

  27. #27
    Quote Originally Posted by chubb View Post
    Just got to get some bits and bobs sorted over the next few weeks.

    Clip ons, some brake protectors in case someone merges right, get a proper exhaust hanger. Maybe some different brake and clutch levers.
    Will strip it tonight.

    anyone know anything about flashing the ECU? Looking at the Woolich stuff but some people reckon Tuneboy is the way to go. (Gonna keep this one to superbike rules)
    Woolich is the go, so much stuff that can be changed apart from tune.

    And from what I have seen arrow is the go, but I agree with wetty, have a ride and see what you think.

    Other thing I found is front brakes can fade, am sure it's all been done but:

    S/S lines
    Good pads, I run vesrah
    Run backing plates
    660 motul fluid and change regular

    But your a old hand at this, so am sure your all over it


    Sent from my iPhone using Tapatalk

  28. #28
    Quote Originally Posted by chubb View Post
    Yeh the pipe on it is shit..(hotbodies crap) gonna ask the boss about the Arrow ones.

    Ktech already set up to my jockey frame.. even got 3 different springs front and rear in case Santa feeds me too much over Christmas
    Akrapovic' is the only way to go and run a DanMoto muffler .

  29. #29
    Quote Originally Posted by Nelso View Post
    It's what lots of quick guys have been running, so it can't be too bad. Leanne had a go on one set up with Ktec suspension a couple of weeks ago and said it was perfect. Now, she wants (says she NEEDS) to get one! She has already sold both of her 125s and has the ZX6 up for sale, so it won't be too long before she gets hers too.
    dont let her have a run on anything else in the bedroom

  30. #30
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032


    slowly started to look into it.. will probably be slowed down by Santa

    Also what is stock height setting for the forks? Flush with triple clamp?
    Last edited by chubb; 23-12-2014 at 08:58 AM.

  31. #31
    Senior Member Saturnalian's Avatar
    Join Date
    Feb 2013
    Location
    Copacbana
    Posts
    739
    Looks great Rancell. Boom !! times ahead.

  32. #32
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  33. #33


    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  34. #34
    Flush is good to start
    You will need a GB cover on the clutch

  35. #35
    Quote Originally Posted by senator8 View Post


    got that covered all ready

  36. #36
    Quote Originally Posted by WETTY View Post
    got that covered all ready
    ?

  37. #37
    I have about 5mm from top of tripe clamp to base of screw on top of fork leg


    Sent from my iPhone using Tapatalk

  38. #38
    Quote Originally Posted by stevem View Post
    ?
    yeh ok sir bagger , next time 4u

  39. #39
    Quote Originally Posted by Leezx10r View Post
    I have about 5mm from top of tripe clamp to base of screw on top of fork leg


    Sent from my iPhone using Tapatalk
    and what makes u think thats close to right ?

  40. #40
    Quote Originally Posted by WETTY View Post
    and what makes u think thats close to right ?
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  41. #41
    Quote Originally Posted by WETTY View Post
    and what makes u think thats close to right ?
    Did I say it was?


    Sent from my iPhone using Tapatalk

  42. #42
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by WETTY View Post
    Flush is good to start
    You will need a GB cover on the clutch
    cheers.. will get those GB cover sets too

  43. #43
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by senator8 View Post


    Will see you on the grid next year.. like them do the talking...

  44. #44
    Quote Originally Posted by chubb View Post
    Will see you on the grid next year.. like them do the talking...
    Ok, but only for the first 2 laps
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  45. #45
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by senator8 View Post
    Ok, but only for the first 2 laps
    yeah all your B grade prowess will just blow by me

  46. #46
    Quote Originally Posted by chubb View Post
    yeah all your B grade prowess will just blow by me
    ? There wasn't any talent inside my envelope. Just the letter
    Pre Modern Formula 1 Champion 2013 (GSXR750T)

    www.wet4uracing.com.au Race bike & mechanical prep, fairings and parts - www.bikeshop.com.au (Protech Motorcycles)Tyres, parts and dyno tuning www.stayupright.com.au motorcycle rider training from learners through to track skills - http://worthingtonmotorcycles.com.au BMW, Honda, MV Augusta, Moto Guzzi and Aprilia

  47. #47
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032

    Chubb's new steed

    Need to drain the coolant eventually for racing. Surprised to find stock headers are Ti. And no cat in them like the R6!


    Hey where does the reg/rec normally mounted?? Wetty? Baddie?


    Need to make up a custom bracket to mount the lie detector too. Probs on top of the tank.

  48. #48
    Senior Member Nelso's Avatar
    Join Date
    Mar 2013
    Location
    Wollongong
    Posts
    391
    Quote Originally Posted by chubb View Post
    Hey where does the reg/rec normally mounted?? Wetty? Baddie?
    I'm pretty sure they mount to the inside of the fairing from the factory. Most of the track bikes I have seen have them mounted where your's is.
    2011 ZX10R track/race bike
    ZRX1200 road bike
    Period 6 ZXR 750 race bike
    P6 250 production RMX250 motard race bike
    2015 YZ450F Dirt track/motard
    TE511 trail bike/motard

  49. #49
    Moderator Baddie's Avatar
    Join Date
    Feb 2013
    Location
    Glenmore Park
    Posts
    352
    Ill take a picture tomorrow of the bracket I made....

    I attached it to the frame...See Picture.
    wwwwwwwwjjjjjjjjjjjwwwww.png

  50. #50
    That does look a little too close to the radiator, no? The one the 6 would get stupidly hot just sitting inside the fairings, can't image how hot it would get if I had it where that one is. Well, tbh, that was the faulty rectifier which Kawasaki kindly replaced on recall... so that might have had something to do with it.

Thread Information

Users Browsing this Thread

There are currently 10 users browsing this thread. (0 members and 10 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •