Page 2 of 2 FirstFirst 12
Results 51 to 82 of 82

Thread: SMSP - Cameras now allowed!

  1. #51
    Quote Originally Posted by Sicko View Post
    Damn man! You ok?
    Bike need another touch up??
    Yeh all good, got back out and had a play, more than a little off the pace after that, but wanted to make sure bike was good for next weekend.
    Think it's getting wrapped this time Owen, feel bad keep going back to the painter hehe

  2. #52
    Quote Originally Posted by Plumb View Post
    Except my pride and my ears from the mrs ear bashing

    Sent from my iPhone using Tapatalk
    I get that! I just keep my ear plugs in for a while, and move to the shed to work on the bike

  3. #53
    Quote Originally Posted by Sicko View Post
    Noooooo!! What happened mate?
    That's the worst kind of footage... or is it kneeage?
    Elbow. Actually I was supprised how bad it was, I drove to the hospital.
    To much gas lost the back end, and must have cut the throttle. I'll have a look at the footage in a couple of days


    Sent from my iPhone using Tapatalk

  4. #54
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by Leezx10r View Post
    Yeh all good, got back out and had a play, more than a little off the pace after that, but wanted to make sure bike was good for next weekend.
    Think it's getting wrapped this time Owen, feel bad keep going back to the painter hehe
    Ah, good to hear!! Wrap is a good idea.. Who is doing that for ya?

    Quote Originally Posted by plumb View Post
    Elbow. Actually I was supprised how bad it was, I drove to the hospital.
    To much gas lost the back end, and must have cut the throttle. I'll have a look at the footage in a couple of days
    Elbowage! Yikes. Thats crazy you drove?!
    Was it a high side then? Yeah, post the footage when you get it
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  5. #55
    Quote Originally Posted by Sicko View Post
    Ah, good to hear!! Wrap is a good idea.. Who is doing that for you
    :
    Your talking to him

  6. #56
    Licker Button699's Avatar
    Join Date
    May 2014
    Location
    The gong
    Posts
    94
    Quote Originally Posted by Leezx10r View Post
    Your talking to him
    Satin black!!!! That's what colour u need it.. I don't even wash my bike.. Just keep spraying black straight over the top... Lol.. Also lee after a fall ur supposed to go back out and go even faster!!! Came up predi good but.. I'd b cheering bout that!!

  7. #57
    Quote Originally Posted by Button699 View Post
    Satin black!!!! That's what colour u need it.. I don't even wash my bike.. Just keep spraying black straight over the top... Lol.. Also lee after a fall ur supposed to go back out and go even faster!!! Came up predi good but.. I'd b cheering bout that!!
    Got 3m black satin wrap in the shed, might have a play.
    Yep was lucky with bike and myself.
    Thanks again on the bar, will bring you a replacement next weekend

  8. #58
    Your going better than me Lee. My engine let go yesterday so I'm out for FX.

  9. #59
    Licker Button699's Avatar
    Join Date
    May 2014
    Location
    The gong
    Posts
    94
    Happy to help mate! Just bring that one I gave u back after u get urself a replacement!

  10. #60
    Senior Member Saturnalian's Avatar
    Join Date
    Feb 2013
    Location
    Copacbana
    Posts
    739
    Quote Originally Posted by Leezx10r View Post
    Got 3m black satin wrap in the shed, might have a play.
    Yep was lucky with bike and myself.
    Thanks again on the bar, will bring you a replacement next weekend
    Quick one re wrapping Lee. Stay with the good shit. Having wrapped my second set of fairings now the difference between a good vinyl wrap and a notso good (read cheap) are light years apart.
    The 3m is so much more workable, washable and durable than any of the cheaper ones i've used.

    And don't be tempted to use a blade except to cut the vinyl off the roll. The knifeless tape is the shiz once you get the hang of it.Really easy to get a good butt seam by using 2 strips of knifeless tape on each join.

  11. #61
    Quote Originally Posted by stevem View Post
    Your going better than me Lee. My engine let go yesterday so I'm out for FX.
    Gets fucked, really Steve! That's no good at all.
    Hope it's as miner as can be mate. If you need a hand, just ask mate.

    Quote Originally Posted by Saturnalian View Post
    Quick one re wrapping Lee. Stay with the good shit. Having wrapped my second set of fairings now the difference between a good vinyl wrap and a notso good (read cheap) are light years apart.
    The 3m is so much more workable, washable and durable than any of the cheaper ones i've used.

    And don't be tempted to use a blade except to cut the vinyl off the roll. The knifeless tape is the shiz once you get the hang of it.Really easy to get a good butt seam by using 2 strips of knifeless tape on each join.
    Yep 3m all the way. A few people have said to stay away from the cheap shit.

    Seen the knife less tape, never tried it, but if you say it's good, I will give it a go.

    Thanks for the inside tips

  12. #62
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Quote Originally Posted by stevem View Post
    Your going better than me Lee. My engine let go yesterday so I'm out for FX.
    cant pump 300hp and expect it to last...
    did you pull it all apart yet????

  13. #63
    Quote Originally Posted by chubb View Post
    cant pump 300hp and expect it to last...
    did you pull it all apart yet????
    Yeah , good thanks brother

  14. #64
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by stevem View Post
    Your going better than me Lee. My engine let go yesterday so I'm out for FX.
    Noooo!! This sucks man...
    What's the plan for re-build or has it got to replace?
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  15. #65
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by Leezx10r View Post
    Your talking to him
    Nice! Can you do a 'How To' after you've learned from all the mistakes?
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  16. #66
    It's a replacement Owen, a couple of decent holes in the cases. All good.

  17. #67
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by stevem View Post
    It's a replacement Owen, a couple of decent holes in the cases. All good.
    I could do with a replacement Owen! Hahaha...
    So will it just be new cases or is there more that'll need to be swapped out?
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  18. #68
    Quote Originally Posted by stevem View Post
    Your going better than me Lee. My engine let go yesterday so I'm out for FX.
    Shit not good to hear! Did you at least get a decent go on the new suspension before it let go?
    Pronounced Kang-Ah not Kang-Gah

  19. #69
    Quote Originally Posted by Sicko View Post
    Nice! Can you do a 'How To' after you've learned from all the mistakes?
    Think I can do that for you all

  20. #70
    Quote Originally Posted by Sicko View Post
    Ah, good to hear!! Wrap is a good idea.. Who is doing that for ya?



    Elbowage! Yikes. Thats crazy you drove?!
    Was it a high side then? Yeah, post the footage when you get it
    Just as screen shot video, but tell me what you guys think.
    I think I got on the gas a bit early lost the back and over corrected ???? I pretty sure I diddent chop the throttle but not 100% sure it happened pretty quick
    I over took a guy on the back straight prior so entered the corner a little narrower than my usual line. Not sure weather that was part of the issue?


    Be nice im just a track learner


    Sent from my iPhone using Tapatalk

  21. #71
    Moderator chubb's Avatar
    Join Date
    Feb 2013
    Location
    Melbourne
    Posts
    2,032
    Looks like you got on the gas too much too soon on the small part of the tyre and chopped it else it would have low sided

  22. #72
    Quote Originally Posted by Plumb View Post
    Just as screen shot video, but tell me what you guys think.
    I think I got on the gas a bit early lost the back and over corrected ???? I pretty sure I diddent chop the throttle but not 100% sure it happened pretty quick
    I over took a guy on the back straight prior so entered the corner a little narrower than my usual line. Not sure weather that was part of the issue?


    Be nice im just a track learner


    Sent from my iPhone using Tapatalk
    What tyres were you running, Luke? It looks like just a bit too much gas on a not-so-grippy tyre. It's not 'oh clearly that was wrong', so probably just one of those things. Assuming the tyre was good....
    IMA Thumb Brakes! Shop now

    Annitori QS PRO quickshifters Shop now

    Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing


  23. #73

    SMSP - Cameras now allowed!

    Quote Originally Posted by chubb View Post
    Looks like you got on the gas too much too soon on the small part of the tyre and chopped it else it would have low sided
    Hmm I must have chopped it, that's one thing I thought id taught myself not to do definitely on the gas to early
    Edit lol


    Sent from my iPhone using Tapatalk
    Last edited by Ruckos87; 21-03-2015 at 07:56 PM.

  24. #74
    Quote Originally Posted by Marshy View Post
    What tyres were you running, Luke? It looks like just a bit too much gas on a not-so-grippy tyre. It's not 'oh clearly that was wrong', so probably just one of those things. Assuming the tyre was good....
    Tyers are Metzeler slicks only 5 sessions (south circut) old. Heaps left in them.
    I'll put it down to a little inexperience., over eager on the gas, need to stand the bike up quicker. Live and learning guess.



    Sent from my iPhone using Tapatalk

  25. #75
    Quote Originally Posted by Plumb View Post
    definitely on the gay to early
    That'll do it every time ...

  26. #76
    Quote Originally Posted by Phat3R View Post
    That'll do it every time ...
    Lol texting with my left hand...


    Sent from my iPhone using Tapatalk

  27. #77
    Admin Turbo's Avatar
    Join Date
    Feb 2013
    Location
    Brookvale
    Posts
    1,763
    Quote Originally Posted by Plumb View Post
    Just as screen shot video, but tell me what you guys think.
    I think I got on the gas a bit early lost the back and over corrected ???? I pretty sure I diddent chop the throttle but not 100% sure it happened pretty quick
    I over took a guy on the back straight prior so entered the corner a little narrower than my usual line. Not sure weather that was part of the issue?


    Be nice im just a track learner


    Sent from my iPhone using Tapatalk
    Do you have the video with audio?
    That might help to hear what the revs were doing...
    It does look like your right arm comes up after it begins to let go tho.
    I wouldn't be too hard on yourself about chopping the throttle tho, it's a survival reaction after all!
    Skywalker - 2017 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62
    Red Baron - 2013 BMW S1000RR FOZ/Unlimited/Bears Race Bike #62

  28. #78
    Quote Originally Posted by Sicko View Post
    Do you have the video with audio?
    Will do once I'm back at work home pc is shithouse.



    Sent from my iPhone using Tapatalk

  29. #79
    Instead of starting a new thread, I thought I'd revive an old one.

    What's the deal with camera mounts?

    I've heard conflicting versions & the SU site is shit to navigate for clarification.

    Will it pass if you mount a GoPro or similar externally (front number plate) and, can you use a suction cup mount?

    Cheers

  30. #80
    No suction cup mounts. has to be an adhesive or clamping mount and it has to be secondary tethered to some thing decent... (zip ties work as a teather to a hole in something)
    AKA Tumbleweed #52

    Bike: 06 r6 #52 (search for the flouro!!)
    Dirt: Honda Cr125r

    Major Sponsor:

  31. #81
    if you do both of those you will be fine... It has to be mounted before scrutineering so they can see its mounted properly.
    AKA Tumbleweed #52

    Bike: 06 r6 #52 (search for the flouro!!)
    Dirt: Honda Cr125r

    Major Sponsor:

  32. #82
    Thanks for the info Carl.

    I'm off to buy more adhesive mounts.

Thread Information

Users Browsing this Thread

There are currently 10 users browsing this thread. (0 members and 10 guests)

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •