Quote Originally Posted by BoB View Post
Cannot remember off the top of my head but I think it cuts in around 108 and turns off around 104 . Unplug the fan and put 12v to it and it should work , once you know its working ok you can hard wire the cbr 600 to the high beam switch as well as having the auto cut in .(ie use the 12v + from the high beam connected to the 12v + supply to the fan .
Cheers I actually got rid of the lights and running gear. ( might have them in a box of crap) But I'll test the fan tomorrow and make sure it's working 1st. If it is I might let it get a little hotter say 120 and see if it kicks in or not.


Sent from my iPhone using Tapatalk