Cheers Carl and others!
It was on my roadbike and I ripped it off before I sold it. Along with the power commander and velocity stacks I had mapped to it. I probably should have it remapped to my motor, but after the quick round the block a few times comparison to the system I had on there, wowsers... And it is soooo damn pretty! The welds, oh dear lord, the welds...
Chased around electrical bullshit all weekend on the ZX10r trying to figure out why it blew a couple of main fuses. Completly wasted my time found nothing except the fact the battery in my bike is for a 250 and has just over 1/2 the recommended cranking amps. Although it is actually in really good condition but ill be trying to find a bigger one
Also noticed a not too lovely sound coming from the starter motor? Guessing this is something I should try and rectify immediately. Vid of not nice sound below.
Give it a battery that is correct for the bikes rating and that sound may just disappear.
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
hmmmmm, its such a strange noise tho, like excessive gear whine or something.
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
Is starter releasing or meshing properly? I havent listened to it yet but description suggests gear mesh issues
Sent from my SM-N9005 using Tapatalk
Life's too Short- YOLO!
Sounds like a version of space invaders....
Sent from my SM-N9005 using Tapatalk
Life's too Short- YOLO!
Which is kinda awesome, however I'd rather my bike didn't make those kinda sounds...
I do suspect I'll have to pull the starter out and have a look at it. Just really trying to avoid it as it's kinda annoying and time consuming removing throttle bodies and things. While not the hardest work there's a lot of connections and things which takes me a while to do and make sure I've done right, especially with the bazzaz plugged into everything in the universe and having not gone that deep into the 10 before.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Ive really thought about it now and its definitely the power band losing tension Marshy. You need the green one Binksy
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Its universal dual thread with the security head bolts on it. Its designed to never wear out and be tamper proof but they always seem to run out. I run the reds from bunnings for better throttle response but Stu runs the greens you can get from the YEC supplier that are the real trick deal. they are .2 mm wider so you get less of a power hit.
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
Make sure you tension and locktight that power band correctly though. This is when my power band kicked in...
near highside marulan 6dec15_2.jpg
And this is when it broke...
near highside marulan 6dec15_3.jpg
IMG_2991.JPGIMG_3022.JPGIMG_2997.JPGIMG_3015.JPGIMG_3021.JPG Applied more stickers for the corresponding HP gain... and gave it a general clean
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
What happened to the Superbike Source stickers?!?
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
On my desk at the moment. Figuring out best placement... think i have it planned. Dont jump the gun Marshy hhahahah Im unsure on if i want to remove some scratched up crashed vinyl and tick them on or go over the marks.
AKA Tumbleweed #52
Bike: 06 r6 #52 (search for the flouro!!)
Dirt: Honda Cr125r
Major Sponsor:
not bad mate, my best there was 103.027
The completely rebuilt R6 "MetalMan" #70
visit my page:
www.youtube.com/AussiesR6
www.facebook.com/metalmanracing
For all the latest technology in Action Video Cameras, head to www.dvrsafety.com.au
Sponsored by BC Riley Haulage: www.facebook.com/Bcrileyconsulting/
Was doing 59/60s later in the day. So very happy with what was achieved today. Had a go on the Honda 600 last session. What a blast. Miss the 600s
thats flyin dude
The completely rebuilt R6 "MetalMan" #70
visit my page:
www.youtube.com/AussiesR6
www.facebook.com/metalmanracing
For all the latest technology in Action Video Cameras, head to www.dvrsafety.com.au
Sponsored by BC Riley Haulage: www.facebook.com/Bcrileyconsulting/
A bit of 4wd-ing today with Sicko
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Moved into the new house a couple of weeks ago and finally sorted the garage so the bikes can come home. Had to grind the floors and epoxy them and waterproofed the walls to keep her nice and dry.
Sent from my SM-G920I using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
3 days and 2000kms of the best roads i have ever ridden. 800kms of twisties in 1 day...
Brilliant weekend!
Sent from my SM-T355Y using Tapatalk
Life's too Short- YOLO!
Bought one of these today - wheel tyre storage racks - tidied up the black round things that were all over the place very nicely.
http://www.supercheapauto.com.au/onl...ecommendations
This was mt hotham but generally the whole region there in Victoria around omeo tallengatta bruthen etc is brilliant.
Sent from my SM-N9005 using Tapatalk
Life's too Short- YOLO!
Was the weekend for it!
20160117_082329[1].jpg
We did 1200km over 2 days including bonang hwy, run up to omeo, omeo hwy then up over falls (where we ran into Joe) then Mt Buffalo, Granya, Elliots way and Snowy Mtn from Kiandra to Adminaby. Was a great reminder about how much fun the roady is!
Time to bring the old girl out....But shes bleeding alittle...
New gasket time...
Sent from my SM-N915G using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
The completely rebuilt R6 "MetalMan" #70
visit my page:
www.youtube.com/AussiesR6
www.facebook.com/metalmanracing
For all the latest technology in Action Video Cameras, head to www.dvrsafety.com.au
Sponsored by BC Riley Haulage: www.facebook.com/Bcrileyconsulting/
Yah man, as soon as I put them together
These are such a nice bit of kit!!
Oh, the importer mentioned they had a Matris R6 steering damper in stock, if anyone is interested. $695
Sent from my iPhone using Tapatalk
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
There are currently 133 users browsing this thread. (0 members and 133 guests)
Bookmarks