Action camera's

**Mr.Ed** · 13-08-2013, 05:10 PM

Originally Posted by BoB

mounted on tail

mounted on the oggy knob , hoping that the oggy knob will take the damage as its wider than the ego..

Word of advice, Ryan's was mounted same as yours on the tail and it broke off mostly likely due to the vibration. It actually broke the base of casing (see through bit) and not the mount... One advice I'd give to anyone running ANY of these cameras is to ziptie it to the bike in case they come loose. I have mine mounted on the triple and I made a sort of a 'leash' out of zipties that I secure to the camera/bike. It has saved me a few times already...

**BoB** · 13-08-2013, 05:49 PM

Originally Posted by Mr.Ed

Word of advice, Ryan's was mounted same as yours on the tail and it broke off mostly likely due to the vibration. It actually broke the base of casing (see through bit) and not the mount... One advice I'd give to anyone running ANY of these cameras is to ziptie it to the bike in case they come loose. I have mine mounted on the triple and I made a sort of a 'leash' out of zipties that I secure to the camera/bike. It has saved me a few times already...

Thanks Ed.

**senator8** · 13-08-2013, 06:22 PM

Here are some of my mounts.

And here is my newest edition, given it's first shakedown yesterday, It's a lower spec replay xd it is only 720@ 60fps. Not as powerful or featured as it's full hd bigger brother but it is smaller comes with everything needed including many mounts and under $200. I'm going to use it for mounting in spots to see suspension working, swingarm etc as it is very easy to mount almost anywhere. Tried it yesterday mounted to my engine case looking at the front wheel. Did a great job. As you can see it looks tiny in my hand (Baddie, are those words familiar to you?)