The Red Baron has arrived

[Turbo]

Nice write up Owen. I like your description of the R6 positioning for the rider!

What springs you got in the forks right now?

Thanks Rick!
Springs are both 1.0 at the moment. I have two new 1.05 that I can either put both in to replace or more likely go half/half - 1.0/1.05.
It's a quick job that I can even do at the track so we'll try it out and see how she goes.

[stevem]

Do they suggest you can run different springs? That is surprising.

[Linden]

Do they suggest you can run different springs? That is surprising.

Not an issue ... look at the M1R forks from mid 80s rebound on one side compression on the other ... also think single sides swing arms etc- just need clamps/axles that are up to distributing the loads correctly

[johnnyb]

Thanks Rick!
Springs are both 1.0 at the moment. I have two new 1.05 that I can either put both in to replace or more likely go half/half - 1.0/1.05.
It's a quick job that I can even do at the track so we'll try it out and see how she goes.

I have a 1.10 spring set if you want to try.



Sent from my iPhone using Tapatalk