RSV4 Track Build

[Marshy]

Marshy do i need to re-wire the side-stand switch or anything or is it just a case of unplugging it?

Two options: just leave the 'push button' actuator attached, and cable tie it out of the way - the O2 sensor wire is ideal. Or cut the wires, strip the ends twist them together, closing the circuit. If you just unplug the switch, the bike will think the sidestand is down the whole time, and won't run.


Sent from my iPhone using Tapatalk

[Linden]

Two options: just leave the 'push button' actuator attached, and cable tie it out of the way - the O2 sensor wire is ideal. Or cut the wires, strip the ends twist them together, closing the circuit. If you just unplug the switch, the bike will think the sidestand is down the whole time, and won't run.


Sent from my iPhone using Tapatalk

On my Ducatis I put a U shaped wire into the plug to close the circuit