Yullo,
Is anyone else out there actually running a YEC ECU / Harness combination ?
I've started swapping all of the necessary sensors over to the new project chassis and going through and marking the YEC loom have noticed that they have no provisions for the thermo fans at all.
It makes sense to me that this is because race bikes don't run thermo fans ? I do find them handy both on dry hot track days and occasionally to flick the switch on the out lap when racing and let them run until everyone is gridded up.
Any thoughts / idea's on this one ?
I have the YEC ECU and race harness in both my bikes. You're right - there's no provision for fans at all! There's also no Neutral sensor, so you don't get the N light on the dash....
I hardwire in a fan switch as per my 'how-to' thread. Use the (thoughtfully provided by YEC) accessories switched power/earth source on the harness (near the dash plug). This is also perfect for a lap timer etc.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
better stop Jamie you'll take the clubsport by storm!Originally Posted by Saturnalian
Fucking aye this thing is going to be a serious bit of kit.
You should probably get an R6 too Dan like seriously it's only money don't be gay hahaha
Sent from my iPhone using Tapatalk
1/2 the fun is building it, the other half is racing it :-)
2007 Yamaha FZ1 Championship winner (2012) (the tank)
2007 Yamaha FZ1 Road bike
2005 KTM 450 EXC (fun bike)
2005 Yamaha R1 Class winner 2014
one day, for now i've got to give you guys a chance though
I'm almost done with the fibreglassing... jeez it takes a long time sanding...
I decided I'm just going to pull the stickers off mine and give it a bunch of coats without even sanding it haha
If you don't sand it, you'll have a bad time
Not even fussed
do a burnout
The paint will run... that's the @#$ part of it. Trust me. I've done the lazy work before... lol
It's not and show and shine. I'd rather spend time and money on going fast.
do a burnout
Also trying to race prep an aprilia 125, a cb bucket, a dirt track smoker and a spare gsxr600. Nice paint job on fairings is so irrelevant in the scheme of things.
do a burnout
Not judging... and if you ever saw any of my bikes you'd know I agree. But you'll waste your paint by using it without at least a mild prep... might as well save the money and time and just bring the battle scars to the track. I know I did and never regretted it. Well... when ppl point and laugh as you ride by it can get to you if you're feeling vulnerable on that particular day. Not that it ever happened to me or anything...
Sorry Ed; I didn't mean to laugh....
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
hahaha it's the pointing that hurts...
When I did top rider I saw Ant West looking over my bike and laughing at shit. Prick!
Look at Michael Jeffrey.
Quick rider ordinary paint job.
Might lay some $2 primer down before I hit it with the old export rattle can haha
do a burnout
Haha awesome
do a burnout
Again back on topic.
Is there no triangle speed sensor on the YEC harness either??
Trying to find out if the bazzaz can run without Speed and neutral sensor.
The YEC harness has no speed sensor, no neutral light and no fan allowance.
Sent from my iPhone using Tapatalk
what about the 4 pin coupler at the front .. there's a speed wire there..
Yes it does. I don;'t know why this is causing some short circuiting in my brain.
If i remember whatever it is about that little wire i'll come back to you....
I think I'll just have to live without neutral...
Me too! I'd forgotten that also. but I know I had a gear indicator wired in to a YEC harness, so it's certainly possible (and I don't recall it being hard). I never had a neutral light though. It's pretty easy to do without, although if you were keen, the sensor off the gearbox is still physically there, and the light on the dash is too, so it probably isn't technically too difficult to bodgy up a connection.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Nah I can live without neutral.. just want the gear indicator on the dash to work..
Same then. Just grab the signal from the sensor.
IMA Thumb Brakes! Shop now
Annitori QS PRO quickshifters Shop now
Superbike Source Racing: 'Like' our page to keep up-to-date with all our racing
Oh, I have my Gipro working still on the YEC harness. I can help you with that. Or is your ECU re flashed so it shows gear on the stock dash
Sent from my iPhone using Tapatalk
hes got a Hm dash
you got a netural sensor hooked up Jamie?
I got one with reflashed ECU
one with YEC ECU
Stock dash is just backup for clearing error codes and in case the HM fails. (touch wood)
There are currently 1 users browsing this thread. (0 members and 1 guests)
Posting Permissions
Reply With Quote
Bookmarks